Monday, December 21, 2015

Farmer's Wife - Week 26

Week 26 of our Farmer's Wife Quilt-along brings three more blocks that should be fairly easy, but still interesting.  The blocks are:
  • Block 56 - Maple Leaf
  • Block 85 - Square Dance
  • Block 101 - Wedding Ring


Block 56 - Maple Leaf

This block is a 9-patch of solid blocks, HSTs, and one easily pieced block.

Farmer's Wife - Block 56 - Maple Leaf

Start by cutting four 2 1/2 inch squares for the solid blocks, 3 green and 1 white.  Next, make four 2 inch HSTs, finished, that are white and green.  Start with 2 7/8 inch squares to make these HSTs using our familiar tutorial, and trim them to 2 1/2 inches.

For that last corner block, the stem of the leaf, cut a 1 inch strip for the stem (green) that is at least 3 1/2 inches long.  Next, cut two white triangles from a 2 1/2 inch square (make it larger if you want some wiggle room).  Now, sew the triangles to either side of the strip, being sure to honor the scant 1/4 inch seam allowance and being sure to keep the triangles even, lined up on either side of the strip.  Iron the block, then trim it to 2 1/2 inches square, making sure that the strip is lined up on the center diagonal.

Now you have all nine pieces, you can assemble the block appropriately!

 

 Block 85 - Square Dance

For this block, I recommend a feature fabric for the center.  If you like embroidery, this might be a nice place to do some; or if you have a large print fabric with an interesting element that would fit there.  This center block will be cut 4 1/2 inches square.

Farmer's Wife - Block 85 - Square Dance

The four corner blocks should be cut 1 1/2 inches square.  Finally, the four side pieces will be made using foundation paper piecing or traditional piecing using this template.

Attach two of the side pieces to either side of the center square.  Attach the small squares to each end of the other two side pieces, then sew these large units to the top and bottom of the center square.

 

Block 101 - Wedding Ring

Wedding Ring is a 5x5 block that has a lot of HSTs and squares.

Farmer's Wife - Block 101 - Wedding Ring


You will need the following parts:
  • Nine solid blocks, cut 1 11/16 inches square; 5 white and 4 green
  • Sixteen HSTs, made using the tutorial reference above in block 56; start with 2 1/4 inch squares and be sure to trim them to 1 11/16 inches before assembly.
Arrange these 25 squares appropriately and assemble.


See instructions for Week 25 Farmer's Wife Quilt-Along.

No comments:

Post a Comment